Basically the foundation of each building is not the same and different. It all depends on how much the weight of the building must be supported by the foundation. Generally the foundation is divided into two types, namely shallow foundation and deep foundation. Shallow foundation is a foundation with a depth of approximately 1/3 of the width of the foundation with a depth of less than 3 meters. While the deep foundation is a foundation that is installed in depths of more than 3 meters below ground level elevation. For this type of residential building, the foundation that is commonly used is a shallow foundation. Because the weight of the building is not too large compared to high-level buildings. For that, here are some types of house foundations that you must know, see! Meanwhile, perhaps you also want to get the free foundation repair estimate in Dallas TX.
This type of foundation is used as a load support for individual points such as structural columns in buildings. The shape also varies, can be in the form of circles or circles and also square. Tread foundations are usually made of reinforced concrete layers of uniform thickness.
As the name implies, the track foundation is used to support longitudinal loads or line loads derived from both columns and walls. This foundation can be made in elongated shapes in the form of square or trapezoidal pieces. Line foundation is usually used as a home wall foundation or practical column foundation. To make it, you need ingredients in building a house such as a broken stone pair, river stone, cast concrete and so on.
By building a house using this type of mat foundation is intended to spread the burden of the structure over a wider area. The use of this foundation is usually carried out under column load conditions or other structural loads adjacent to the foundation and interact with each other. This foundation is composed of reinforced concrete plates that span a predetermined area. The advantage of this type of foundation is that it is able to reduce the local decrease by means of a concrete plate which will compensate for the differential movement between the load positions.